PLC Splitter 1x2 with SC/APC Connectors PLC-102-A-SC/APC-9-SC/APC-15
- Insertion loss: ≤4.1 dB
- Uniformity: ≤0.6 dB
- Plarization dependent loss: 15 dB
- Directivity: ≥55 dB
- Return loss: ≥50 dB(UPC)/ ≥55 dB(APC)
Advanced development of integrated optics allows this planar optical splitter - PLC (Planar Lightwave Circuit) splitter - to combine an incredibly small size, the widest bandwidth covering the entire operating range, the best characteristics for this type of devices, as well as high reliability and stability of operation at any external conditions. Optical PLC splitters are designed to split one input signal into several output signals or combine several signals.
Description
PLC splitters are made by depositing a waveguide layer (silicon dioxide) on a silicon substrate, then a ribbon fiber is welded to the resulting chip. Thereby to this technology, they can combine heat resistance, miniature size and a wide operating wavelength range.
Planar PLC splitter PLC-102-A-SC/APC-9-SC/APC-15 type 1*2 has one input cable with SC/APC connector and two output cables with SC/APC connectors as well.
The body of this PLC splitter is a metal tube. Tube size is 50*7*4 mm.
The PLC-102-A-SC/APC-9-SC/APC-15 splitter uses a cable with a diameter of 0.9 mm, a length of 1.5 m. Cable fiber is G657A, the cable sheath is made of LSZH material, characterized by low smoke emission in case of fire, and the absence of halogen toxic gases.
Application
-
PON
-
FTTx
-
CATV
-
Network monitoring
Details
• Wide operating wavelength range 1260-1650 nm
• Low insertion loss
• Low back reflection
• Low PDL
• WDL value
• Low TDL
• High output signal uniformity
• High reliability
• Conform to Telcordia GR-1209 and GR-1221 recommendations
• Miniature size for use in small spaces
Splitter type |
1*2 |
|
Warelenght (nm) |
1260 ~ 1650 nm |
|
Insertion Loss (dB) |
≤4.1 |
|
Uniformity (dB) |
≤0.6 |
|
Return Loss (dB) |
≥50 dB(UPC); ≥55 dB(APC) |
|
Polarization Dependent Loss (dB) ≤0 |
15 |
|
Directivity (dB) |
≥55 |
|
Fiber Type |
G.657.A1 or customized |
|
Connector |
SC, LC, FC |
|
Fiber Length |
1000 mm, 1500mm, 2000mm or customized Diameter: 0,9 mm/2mm/3mm |
|
Material |
Hytrol, LSZH or customized |
|
Environment |
Operating Temperature |
- 40 ~ 85 Co |
Storage Temperature |
- 40 ~ 85 Co |
|
Humidity |
≤ 95% (+40 Co) |
Payment methods: PayPal, Wire/ACH Transfer, Net Terms
Learn more
Delivery methods: UPS Ground , UPS Next Day.
Learn more
Moon Moon
|
I've been using this splitter for a few weeks now, and I gotta say, it's good stuff! The insertion loss is minimal—did you know that insertion loss can really mess up your network if it's too high? Well, no worries here. The signal uniformity is first-rate, like a perfectly baked pizza! 🍕 I've used other splitters before, but this one is the bee's knees |
JBean87
|
Installed this PLC splitter, and it's impressive. Low insertion loss and great signal uniformity in a compact size. Solid for PON networks.
|
Bytear
|
Picked up this PLC splitter and it's been solid so far. Low insertion loss and good uniformity, just what I needed for my network setup.
|