Design and construction of PON-networks
Design and construction of PON-networks
We develop and implement solutions based on GPON and GEPON of any complexity for telecom operators, Internet providers in cities and private sector, industry enterprises.
Work experience on the telecommunications technology market, in-house production, equipment warehouse, service centre guarantee compliance with standards and comprehensive support at all stages of the project implementation
Typical Equipment
OLT
GEPON
GPON
ONU
GEPON
GPON
passive components
INFRASTRUCTURE
Optionally, to increase reliability, the unit is equipped with a UPS
Usage Advantages
When deploying a fibre optic network, there is no intermediate active equipment between the provider and the subscriber. The operation of the network is not affected by accidents in the electric network in the area served.
One PON communication centre is able to provide high-quality communication services to hundreds of subscribers in the entire microdistrict or small settlement.
Communication centres, fibre-optic communication lines distributed using optical PLC dividers form a PON network, ready for commercial operation. The number of subscribers is determined only by the power budget and equipment characteristics - if necessary, the network expands without global restructuring.
The cost is calculated individually for each specific project. Leave a request or contact our specialists by phone +1 (682) 214-4959
Send request
Cooperation Arrangement
Getting a request with source data
1
Preliminary planning and cost estimation
2
Approval and signing of cooperation documents
3
Development of design documentation
4
Shipment of equipment and components to the site
5
Network installation according to the approved schedule
6
Testing and commissioning
7
PON Network Design
Proper design of the GPON or GEPON network reduces the budget and installation time, minimises cable field attenuation, provides easy operation and determines the scalability.
FIBERTOOL company provides services for the design and installation of FOCI in all states of America
Stages of Design
1
DATA COLLECTION
receipt of the terms of reference from the customer with information on the site or area, and the system configuration requirements
2
configuration planning
choice of topology, splitters, optical cables for trunk, distribution and subscriber sections, client and station equipment
3
development and approval of a PON-networks detailed scheme
by the customer with location of nodes, splice cases and splitters, FOCL laying paths, equipment composition, cross-connection patterns
4
calculation of optical power budget
the difference between the power of the ONT transmitter and the sensitivity of the OLT receiver and the calculation of the maximum cable field attenuation from the transmitter to the most distant receiver
FIBERTOOL provides a complete documentation package. A finished project includes:
Equipment specifications
Working drawings and diagrams
Estimates
Initial specifications
Calculations
Explanatory note
PON-based Solutions
Solutions based on PON standards ITU-T G.984 and IEEE 802.3av are reliable, cost-effective and scalable.
PON Network Construction
Professional installation ensures reliable trouble-free operation of lines and equipment throughout the estimated useful life.
FIBERTOOL develops PON-network projects for large and small sites. We provide services as a set and separately. You can order only design or installation.
Installation Stages
1
delivery of fibre optic cables to the site
as well as active and passive equipment, components in accordance with the specification, and input control
2
installation and laying of optical fibre
in accordance with the standards, technical regulations and project requirements
3
installation of couplings, distribution cabinets, main distribution frames
connecting an optical cable to the network equipment
4
network testing and handing over of the site/facility
to the customer together with the executive documentation
|
|
Ask a Question
|